; ASPEED Graphics Windows WDDM Driver Release Notes
;===============================================================================
v.0.99.10: ycchen@032114
01.[Bug] [DP501] Fixed screen blank if resume from Hibernate
v.0.99.09: ycchen@030414
01.[Bug] [Win8] Fixed screen flashing issue while dragging icons
v.0.99.08: ycchen@022014
01.[Bug] [DP501] Fixed Screen Blank Sometimes and need to re-plug to resume
02.[Bug] Fixed monitor "out of range" issue when hibernate
v.0.99.07: ycchen@012414
01.[Bug] [DP501] Fixed Screen Blank Sometimes and need to re-plug to resume
v.0.99.06: ycchen@010714
01.[Bug] [DP501] Fixed Screen Blank Sometimes even re-plug DP connector
v.0.99.05: ycchen@010204
01.[New] [Win8] Support Multi Refresh Rate
02.[Bug] [DP501] Fixed Screen Blank Sometimes Issue
03.[Bug] [SIL164] Fixed Screen Blank Resume from Suspend
04.[New] [DP501] Modify for Lenovo Ramjet and Renegade SDV
v.0.99.04: ycchen@120613
01.[Bug] [DP501] Fixed EDID cannot be read properly when system reset
v.0.99.03: ycchen@120313
01.[Bug] [AST2400 + DP501] Fixed screen noise issue when system reset
02.[Bug] Fixed 1600x1200 will be disabled if the prefer timing of the monitor is 1920x1080
v.0.99.01: ycchen@112113
01.[Bug] [AST2400 + DP501] Fixed DP Dongle Compatible Issue
v.0.99.00: ycchen@111513
01.[New] [AST2400] Support AST2400 + DP501
-------------------------------------------------------------------------------  
v.0.98.01: ycchen@090513
01.[New] [Win8] Support Win2012R2, Win8.1 x86/x64
02.[Bug] [Win8] Fixed HCK2.1 - FPO Optomization Check Failed Issue
03.[Bug] [Win8] Fixed HCK2.1 - Device Driver INF Verification Failed Issue
04.[New] [Vista/Win7] Use MMIO instead of IO port access
v.0.98.00: ycchen@080306
01.[New] [Win8] Support Multi-Adapters
02.[Bug] [Win8] Force to VGA Mode for embedded CRT enabled platform
03.[New] [Win8] Use MMIO Mode instead of Legacy Relocate IO Access
04.[Bug] [ite66121] Fixed I2C interrupt be trigerred issue
05.[Bug] [ite66121] Fixed Read EDID un-stable issue
06.[Bug] [Win8] Fixed Reboot Stressed Hanged Issue, ycchen@080313
------------------------------------------------------------------------------- 
v.0.97.06: ycchen@022013
01.[Bug] [Win8] H/W cursor did not be disabled properly if unload driver
02.[Bug] [Win8] Fixed TDR timeout issue
03.[Bug] [AST2000] Fixed display abnormal issue
04.[New] Modify for Read EDID Stability
v.0.97.05: ycchen@122512
01.[New] Remove Wide Screen Mode if the prefer timing of the monitor is not wide screen mode
v.0.97.04: ycchen@121112
01.[New] Support ITE66121 on AST2300/2400
-------------------------------------------------------------------------------
v.0.96.06: ycchen@120512
01.[Bug] [Win8] Fixed S3 resume failed issue
02.[New] [Win8] remove double buffer limitation 
03.[New] [Win8] [AST2300] Disable ASPM
v.0.96.05: ycchen@111412
01.[Bug] [Win8] Fixed HCK - GammaRamp Test Failed Issues
02.[Bug] Modify DRAM Setting by H/W request
v.0.96.04: ycchen@102312
01.[Bug] [Win8] Fixed iKVM not work peroperly issue
02.[Bug] [Win8] Fixed HCK - WDDM CCD Test connectivity status failed issue
v.0.96.03: ycchen@101512
01.[Bug] [Win8] Add I2C Interface and SetPalette DDI for WHCK Certification
02.[Bug] [Win8] Modify INF filefor WHCK certification
v.0.96.02: ycchen@100312
01.[Bug] [Win8] Fixed cause bug check 0x50 if runing HCK\WDDM PnPStopModeSwitch Test
v.0.96.01: ycchen@092812
01.[Bug] [Win8] Fixed ASPEED gaphics driver cannot install properly with GOP driver on Windows Server 2012
v.0.96.00: ycchen@090512
01.[Bug] Fixed 1920x1080 Screen not Full on SAMSUNG SyncMaster BX2231 
02.[New] Support 1600x900 60Hz (CVT Reduced Blank)
03.[Bug] Fixed resolution cannot above than 1400x900 if attached non-PnP monitor, ycchen@082912
04.[Bug] [AST1300] Fixed AST1300 cannot support wide screen mode
05.[New] Set CVT non-reduced blank as default timing for 1280x800, 1400x900, 1650x1080, ycchen@090512
06.[Bug] [AST2400] Fixed adapter info. in display page is in-correct
-------------------------------------------------------------------------------
v.0.95.01: ycchen@052112
01.[Bug] Fixed iKVM cannot display properly with older VBIOS (before v.0.92.00)
02.[New] [AST2300] Modify DRAM settings by H/W request (2012_05_09) 
03.[Bug] [AST2300] Avoid I2C1 lock issue if customer I2C1 layout is not correct
04.[New] Support 1360x768 60Hz
v.0.95.00: ycchen@041212
01.[New] [AST2400] Support AST2400
02.[New] Support on Windows 8 Customer Preview
-------------------------------------------------------------------------------
v.0.93.09: ycchen@061711
01.[2008R2] Fixed 1600x1200 60Hz didn't show in the mode list if use ASUS VK247H Monitor
v.0.93.08: ycchen@053111
01.[New] [AST2300] Modify MCLK to 396MHz by H/W request
v.0.93.07 by ycchen@050511
01.[Bug] Fixed system hanged if attach Synco 19" LCD Monitor, ycchen@050111
02.[Bug] Fixed 640x480 256c display abnormal issue, ycchen@050411
03.[Bug] Fixed 60/70/72Hz disappear issue on Benq HD2200, ycchen@050511
04.[Bug] Fixed it takes too long time to get EDID from EDID failed monitor
05.[Bug] Fixed cursor display abnormal while playing kmplayer
v.0.93.06: ycchen@042911
01.[Bug] Fixed screen abnormal if resume from monitor off, ycchen@042111
02.[Bug] Fixed 256c mode color and cursor abnormal issue, ycchen@042511
03.[Bug] Fixed Driver can't load properly issue under Vista/Server2008, ycchen@042611
04.[Bug] Fixed Read EDID unstable issue, ycchen@042711
05.[Bug] Fixed Mode List Include Monitor Unsupport Modes
v.0.93.05: ycchen@042111
01.First release

